Logo
Educational tender items for schools in Malaysia
"AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"
 
Product Range
 
News Letter
All Fields are mandatory.
Your Name :
Country :
Your Email ID:
Security Code
 
   
 

Wooden Lab Products
 
[1] 2 3 4 [ Next»]
 
LAMINAR AIR FLOW MODULE (HORIZONTAL)
Click to Enlarge
LAMINAR AIR FLOW MODULE (HORIZONTAL)

The Equipment is fabricated out of reinforced pest and weather resistant Board which is clad in white mica laminated sheet. Environmental air is drawn by a balanced blower through prefilters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and Biological contaminants larger than 0.3 microns. Table top is covered with stainless steel/ mica sheet.The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube FluorescentTube Light, Gas Cock and manometer, C.R fiting complete. To work on 220/230 V AC 50 HZ.

See Enlarge



LAMINAR AIR FLOW MODULE (VERTICAL)
Click to Enlarge
LAMINAR AIR FLOW MODULE (VERTICAL)

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (optional) at the bottom of the Unit to throw the air outside the Work place.

See Enlarge



LAMINAR AIR FLOW (BIO-SAFETY CABINET)
Click to Enlarge
LAMINAR AIR FLOW (BIO-SAFETY CABINET)

Ultra Clean Air Work Station, Vertical type, made of Pest & weather resistant board which is clad in laminated sheet Work stage thoroughly lined with Stainless Steel (S.S. - 304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E.RA. filtered clean exhaust duct. Efficiency up to 99.97%, retaining particles up to the size of 0.03 micron. To work on 220 230 V AC 50 Hz.

See Enlarge



LAMINAR AIR FLOW (HORIZONTAL) STAINLESS STEEL (SS-316)
Click to Enlarge
LAMINAR AIR FLOW (HORIZONTAL) STAINLESS STEEL (SS-316)

The equipment is fabricated made from rectangular/square pipe than fix with water proof thick board covered with mica. Environmental air is drawn by a balanced blower through prefilters retaining more than 85% of particles and is thrown to work chamber through high efficiency HEPA filters retaining particulate and Biological contaminants larger than. 0.3 microns. Table top is covered with stainless steel (SS-316) sheet. Front door is folding type & Side panel are fixed and made of clear thick plexi glass sheet. Including U.V. Tube, Fluorescent tube light, gas cock & manometer. To work on 220/230 V AC 50Hz.

See Enlarge



LAMINAR AIR FLOW (VERTICAL) STAINLESS STEEL
Click to Enlarge
LAMINAR AIR FLOW (VERTICAL) STAINLESS STEEL

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (Optional) at the bottom of the Unit to throw the air outside the Work. place.

See Enlarge



LAMINAR AIR FLOW (BIO SAFETY) . STAINLESS STEEL
Click to Enlarge
LAMINAR AIR FLOW (BIO SAFETY) . STAINLESS STEEL

Ultra Clean AirWork Station, Vertical type, made of sturdy board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz.

See Enlarge



FUME HOOD (WOODEN)
Click to Enlarge
FUME HOOD (WOODEN)

Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug.

A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.


See Enlarge



FUME HOOD (mild STEEL)
Click to Enlarge
FUME HOOD (mild STEEL)

Fabricated out.of thick c.r.c.a. sheet, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.

Size- Wdt. Dpt. Ht. Exhaust Duct No. 122

01 4' x 2.6'x 31/2' 3" dia
02 5' x 3' x 31/2' 4"
03 6' x 3' x 31/2' 4"


See Enlarge



INOCULATION (U.V.TRANSFER) CHAMBER
Click to Enlarge
INOCULATION (U.V.TRANSFER) CHAMBER

Economical equipment for transfer of material/ tissue and to be used as dry-box and dust proof environmental enclosure. Made of thick board, covered with mica laminated inside Epoxy paint. Fluorescent tube light and U.V. tube inside with covered rectangular opening for transfer of material with two round holes for handling. Perspex sheet cover has been provided for viewing operations. Inside of chamber is painted with Epoxy paint.

01 Size 100 x 60 x 50 cm.(40" x 24" x 20")
02 70 x 50 x 40 cm.(27" x 20" x 16")


See Enlarge



FUMIGATION CHAMBER
Click to Enlarge
FUMIGATION CHAMBER

Versatile chamber for fumigating for sterilization with insecticide for preservation clothes, plants, old books etc. Made of sturdy board, mica covered, Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping perti-dish for fumigants chemical. Castor wheel provided for easy movement.

01 Size- 90 x 60 x 80 cm.(36" x 24" x 32")
02 75 x 50 x 65 cm.(30" x 20" x 26")
03 50 x 40 x 55 cm.(24" x 16" x 22")


See Enlarge



CHROMOTAGRAPHY CHAMBER
Click to Enlarge
CHROMOTAGRAPHY CHAMBER

Glass panelled frame work is made out of teak wood frame finish with clear lacquer polish. The interior is wax coated to make it resistant to the most of the solvents. The lid is also glass paneled and is tightened with clamps and has sealing gaskets. Castor wheels have been provided for easy movements of the equipment. One acrylic tray has been provided for Chemicals. Complete with troughs and glass rods.

01 for 6 filter paper of 57 x 68 cm.
Size- 82 x 32 x75 cm. (33" x 13" x 30")
02 for 4 filter paper of 46 x 57 cm.
65 x 30 x 60 cm. (26" x 12" x 24")


See Enlarge



PHOTOPERIODIC SIMULATION /TISSUE CULTURE RACK
Click to Enlarge
PHOTOPERIODIC SIMULATION /TISSUE CULTURE RACK

Fabricated out of 1x1x12mm wall thickness square M.S. pipe fitted with sturdy castorwheel for smooth shifting movement of the unit. Shelves are made of 'Hylem' sheet area frosted glass. Each shelves has been provided with four fluorescent tubes of 4'size.The unit is workable on 220V AC 50Hz single face. Heavy duty copper chokes have been mounted on a separate connection board with wall hanging arrangement.

Ht. 152 x Shelf Length 127 x Shelf width 61 cm. (60" x 50" x 24")


See Enlarge



TABLE DESK - CUM -TRACER
Click to Enlarge
TABLE DESK - CUM -TRACER

Designed for prolonged work and tracing job provided with removable shaded tube light and a tube light below the frosted glass for tracing work. Finished with mica covered and inside painted.

Size- 67 x 45 x 11.5 / 2.5 cm.


See Enlarge



LITERATURE REPRINT PAPER BOX
Click to Enlarge
LITERATURE REPRINT PAPER BOX

Made of light weight white partial wood, with clamps to hold reprints / paper in position. Nicely polished.

Size - 37.5 x 25 x 7 cm. (15" x 10" x 21/2")


See Enlarge



TABLE DOCUMENT SORTER
Click to Enlarge
TABLE DOCUMENT SORTER

Suitable for.most of lab. office jobs, having five trays with open front for easy sorting of documents. Space provided for keeping pen & pencil etc. On the opening of the last tray. Finish with mica covered & paint.

Size -27x35x27 mm (11" x 14"x 11")


See Enlarge




[1] 2 3 4 [ Next»]


 

 
 
 
Home|About Us|Products|Certificates|Enquiry|Feedback|FAQ's|Contact Us
Copyright © 2010 - International Biological Laboratories. All rights reserved.
Our Associated Websites
www.interlabs-India.com | www.interlabs.in | www.interlabs.co.in | www.ambalalab.com | www.interlabs.info | www.interlabs-has.com | www.best-visibility.com | www.vidyatechnoart.com | www.labs-glassware.com | www.v-pyrex.com | www.ncert-kits.com | www.shoppingbags.com | www.pharmaceuticalgiftsanatomicalmodels.com
 
myspace profile views counter

Warning: fopen(cache/list-wooden-lab-products_32.html): failed to open stream: No such file or directory in /home/interinf/public_html/cache-bottom.php on line 3

Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/interinf/public_html/cache-bottom.php on line 4

Warning: fclose() expects parameter 1 to be resource, boolean given in /home/interinf/public_html/cache-bottom.php on line 5