CIRCUIT BREAKER ANALYSER

TYPE: CBANT01
SYSTEM FEATURES:

• 80386 or higher microprocessor based system.
• Solid state data storage capacity.
• Data is stored in MS Windows readable format.
• Data can be exchanged by normal floppy.
• Analyzing software can be run on any normal PC with the captured data.
• Any dot matrix or inkjet printer can give output graphs on any paper.
• Multiple operating observations are captured by the machine and kept in the memory.
• LCD Screen Display.

DATA ACQUISITION FEATURES:

• 100 kHz A/D conversion.
• All channels are optically isolated.
• 0.5 ms sampling interval per channel.

The operations will be for single break in OFFLINE mode. MAKE, BREAK and O-C-O sequence operation will be provided.

Parameters RECORDABLE:

• Total Travel.
• Contact Gap.
• Contact Loading/Erosion Clearance.
• Contact Penetration.
• Closing Bounce.
• Opening Rebounce.
• Opening and Closing time.
• Speed and Travel at various specified transit positions.
• Transient opening and closing coil voltage.
• Transient opening and closing coil current.

DIGITAL DATA CHANNELS AVAILABLE:

• R phase Contact
• Y phase Contact
• B phase Contact
• N – Contact.

Analogue Date Channels

• R phase Contact – 1
• R phase Contact – 2
• Y phase Contact – 1
• Y phase Contact – 2
• B phase Contact – 1
• B phase Contact – 2
• N – Travel
• Closing coil voltage
• R Closing Coil Current
• Y Closing Coil Current
• B Closing Coil Current
• N Closing Coil Current

Marked channels are normally required and as per our current plan further channel can be extended with the software change only.

SPECIFICATION:

Timing : A period of 100ms nominal.
Trigger : Closure of external voltage free contact to start calibration.
Power Supply: 230 V, 1 Ph, 50Hz.,AC.