| |
Click to Enlarge
|
Three dimension
14/1 Size 100 X 100 X 2.5 plastic sheet with jigsaw cuts on each side along with small holes on the sheet as per sample 2 small rectangle sheets of size 100x50x2.5mm with jigsaw cutting and holes and 2 small rectangular sheets of size 100x50x2.5mm with jigsaw cutting. Two iron rod as per hole diameter and lenght 100 mm. 14/2 Transparent sheet plastic cuboid with size 50x60x70 mm open from one side, along with 4 steel rod of appropriated size 104mm should
be equal. As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Limit and continuity
Size 200x200x 4mm 3 movable arrows
working on particular path of graph made of plastic and two arrows extra provide as per sample . Packed in
plastic box. As per sample.
See Enlarge
|
|
|
|
Click to Enlarge
|
Inverse trigonometric function (sin-1)
Plastic transparent sheet of size
200x200x0.3mm. Graph printed . As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Inverse trigonometric function (cos-1)
Plastic transparent sheet of size
200x200x0.3mm. Graph printed . As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Inverse trignometric function (tan-1)
Plastic transparent sheet of size
200x200x0.3mm. Graph printed As per sample.
See Enlarge
|
|
|
|
Click to Enlarge
|
Inverse trignometric function (sin xand sin- 1x)
Plastic sheet board of size 200 x 200x
3.6 mm, working graph , 4 holes at the back side of 2mm dia. for removing the
graphical curve. As per sample.
See Enlarge
|
|
|
|
Click to Enlarge
|
Graph of (y=ex andy=logex)
Plastic sheet ofsize 200x 200 x 3 /
3.5mm , working graph with 6 holes for the slope at the back side of removing
the graphical curve. As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Increasing and decreasing, maxima and minima.
Plastic sheet of size 225x200x3.5/4mm,2 movable arrows working on paticular path of graph made of plastic as per sample and
packed in plastic box. As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Integral
Paper graph in three different colours
blue, yellow and pink but curve shapes
should be same for all three sets. As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Projection of Vector a on vector b
Plastic sheet of size 225x300x3.5/4mm with two steel rodsof dia.4mm. Both rods 5mm bent at one end after the lenghts of 180 and 160mm. Working
model. As per sample.
See Enlarge
|
|
|
|
Click to Enlarge
|
a.(bxc)
Parallelepiped, each rectangular side of
100mm lenght and 60mm width. Rods of diameter 5mm height 55mm made of plastic. Arrow marked to show vectors
a,b,c As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Distance between two skew lines
Four plastic pipe pieces of dia 30/32, lenght 50mm, internaldia 24mm. Three holes of 2mm dia on each pipe, distance between successive holes 12mm. Two steel rods of dia 2mm, lenght 200 mm and one steel rod of dia
2mm lenght 50mm. As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Intersection of two planes
Plastic white sheet of size
200x200x3.5/4mm with a V shape- slot of 1.8/2 mm depth with 2 square plates coloured blue and yellow of size 100x100x1.5/2 mm made of plastic. As
per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Plane passing through the line of intersection of two
plane
Plastic white sheet of size 200x200x3.5/4 mm and 3 square sheetcoloured red, blue and yellow, size 100x100x1.8/2mm, made of plastic. And three slot cuttings on base sheet as per colouredsheetthickness
anddepth 1.8/2 mm As per sample
See Enlarge
|
|
|
|
Click to Enlarge
|
Angle between two planes
Plastic sheet of size 200x70/75x base
height 15mm, one plastic sheet joined with hinge on top side size 100mmx 75mmx sheet thickness 5mm. Fix one half protractor on one side of base as per sample. And two steel rods, onefixed at right angle to the base and another to the plastic sheet joined. And one half protractor fixed on steel rod perpendicular to the base as per sample. Packed in plastic box. As per
sample
See Enlarge
|
|
|
|
