For metals: Reserve Bending, Cantilever type supplied complete with jigs and fixtures mounted an elegant table with motor, weights, etc.
Features:
This machine is used to test the Fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufacturers and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a Digital counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of IS 5075-1969
Technical Specifications:
- Maximum bending momentkg cm 200
- Bending moment adjustable kg cm25-200
- Ranges I-kg cm 25-125 II-kg cm 125-200
- Gripping dia of specimen mm 12
- Testing dia of specimen mm 8
- Rotating Speed rpm 4200
- Accuracy of applied bending moment.
- Digital counter No. of digits 8
- Power required HP 0.5
- Main supply 3ph,440,V,50Hz,A.C.
- Overall Size (approx)mm 1000 L.X.
- Weight (approx.)kg 120
