| SYSTEM REQUIREMENTS | WINDOWS 95 / 98 |
| PC Connection: | Parallel |
| Power: | DC ? 8V (+ :0.8 Am / -; 0.2 AM) |
| Channel: | 2 channel |
| Impedance: | 1MW 25 pF |
| Coupling: | AC / DC / GND |
| Bandwidth: | DC ~ 30 MhZ – 3dB |
| Resolution: | 8 bit |
| Voltage Range: | 50 mV ~ 5V, 1, 2, 5, 7 step |
| Display: | 8 x 10 div 9DSO) |
| Accuracy: | ? 3% (Gain), ? 0.01 % (Time) |
| Time base range: | 5ns ~ 320s |
| Input range: | ? 50V |
| Max. input: | ? 100 V DC Continuous ? 250 V (DC + AC) Transient |
| X – Y: | ? 3% |
| Auto setup: | DC ~ 30 MHz, Frequency counter |
| Sample clock rate: | 1 Hz ~ 100 MHz |
| Trigger type: | ? slope |
| TV – V / H, TRIG: | Yes |
| Trigger source: | CH1, CH2, EXT |
| Trigger type: | Analog |
| Mag (time): | OK |
| Offset Range: | ? 4 div |
| Data Acquisition: | 32 byte / CH |
| Max Sampling rate: | 100 MPS / CH, Dual 100 MPS |
| Auto calibration: | OK |
| Trace Display: | Point / Line |
| Grid on / off: | Grid on / off |
| Vertical mode: | CH1, CH2, Dual, ADD |
| Horizontal mode: | AUTO, NORM, SINGLE |
| Single: | DC ~ 30MHz |
SPECTRUM ANALYZER
| Channel: | 2 channel |
| Methode: | Fast fourier transform |
| Spectral Range: | 0Hz ~ 50MHz |
| Cursor: | Frequency |
| Pass / fall test": | Yes |
| Instrument function: | DSO, S/A |
| Data Point: | 32K per channel |
GENERAL
| Include with Unit | DSO, Power Supply, Software, Cable, Manual, FFT |
Optional | Probe (2EA), TV-V/H, TRIG |
